www.clare.com ds-CPC1961-r06 1 CPC1961 dual ac solid state relays rohs 2002/95/ec e 3 pb part # description CPC1961g 8-pin dip (50/tube) CPC1961gs 8-pin surface mount (50/tube) CPC1961gstr 8-pin surface mount (1000/reel) parameters ratings units blocking voltage 600 v p ac operating voltage 260 v rms load current 1 250 ma rms on state voltage drop 3 v rms (at i l = 250ma rms ) 1 one pole operating applications features description ordering information pin configuration ? programmable control ? process control ? power control panels ? remote switching ? gas pump electronics ? contactors ? large relays ? solenoids ? motors ? heaters ? load current up to 250 ma rms ? 600v p blocking voltage ? 5ma sensitivity ? zero-crossing detection ? dc control, ac output ? optically isolated ? ttl and cmos compatible ? low emi and rfi generation ? high noise immunity ? machine insertable, wave solderable ? flammability classification rating of v-0 the CPC1961 is a dual single-pole ac solid state relay that uses optical coupling with dual monolithic scr outputs to produce an alternative to optocoupler and triac circuits. the CPC1961 switches are robust enough to provide up to a 600v p blocking voltage. in addition, tightly controlled zero cross circuitry ensures switching of ac loads without the generation of transients. the input and output circuits are optically coupled to provide 3750v rms of isolation and noise immunity between control and load circuits. as a result the CPC1961 is well suited for industrial environments where electromagnetic interference would disrupt the operation of electromechanical relays. the CPC1961 is offered in a space saving 8-pin dip package with two independent switches. approvals ? ul recognized component: file 69938 ? csa certified component: certificate 1172007 zc ac load ac load C led + led 3 4 6 5 zc ac load ac load C led + led 1 2 8 7
www.clare.com 2 r06 CPC1961 absolute maximum ratings are stress ratings. stresses in excess of these ratings can cause permanent damage to the device. functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. absolute maximum ratings @ 25oc electrical characteristics @ 25oc parameter ratings units blocking voltage 600 v p reverse input voltage 5 v p input control current peak (10ms) 50 ma 1a input power dissipation 1 150 mw total package dissipation 2 800 mw isolation voltage, input to output 3750 v rms operational temperature -40 to +85 c storage temperature -40 to +125 c 1 derate linearly 1.33 mw / oc 2 derate linearly 6.67 mw / oc parameters conditions symbol min typ max units output characteristics operating voltage range v l - 20 - 260 v rms load current 1 , continuous v l =120-240v rms i l 0.005 - 250 ma rms non-repetitive single cycle surge current t < 10ms i tsm --1a off state leakage current v l =600v i leak --1a on-state voltage drop i l =250 ma rms ---3v rms critical rate of rise 2 - dv/dt 500 - - v/s holding current i f =5 ma i h - 300 - a switching speeds turn-on i f =5 ma t on - - 0.5 cycles turn-off t off - - 0.5 zero-cross turn-on voltage 1st half-cycle - - 5 20 v subsequent half-cycles - - - 5 v operating frequency 3 - 20 - 500 hz load power factor for guaranteed turn-on 4 - pf 0.25 - - - input characteristics input control current 5 -i f - 1.2 5 ma input voltage drop i f =5ma v f 0.9 1.2 1.4 v input drop-out voltage - 0.8 - - v reverse input current v r =5v i r - - 10 a common characteristics input to output capacitance - c i/o -3-pf 1 maximum continuous load current of a single pole or the sum of the load currents with both poles operating simultaneously. 2 tested in accordance with eia/narm standard rs-443. 3 zero cross 1st half-cycle @ <100hz 4 snubber circuits may be required at low power factors. 5 for high noise environment use at least 10ma led current.
CPC1961 www.clare.com 3 r06 performance data* *the performance data shown in the graphs above is typical of device performance. for guaranteed parameters not indicated in t he written speci? cations, please contact our application department. led forward voltage drop (v) 1.23 1.24 1.25 1.26 1.27 device count (n) 0 5 10 15 20 25 30 35 typical led forward voltage drop (i f =5ma, t a =25oc) on-state voltage (v) 2.1 2.2 2.3 2.4 2.5 device count (n) 0 5 10 15 20 25 typical on-state output forward voltage distribution (i f =5ma, i l =250ma, t a =25oc) blocking voltage (v p ) 735 740 745 750 755 device count (n) 0 5 10 15 20 25 typical blocking voltage distribution (i f =0ma, t a =25oc) led forward current (ma) 1.10 1.15 1.20 1.25 1.30 device count (n) 0 5 10 15 20 typical i f for switch operation (i l =250ma, t a =25oc) temperature (oc) -40 -20 0 20 40 60 80 100 led forward voltage (v) 1.0 1.1 1.2 1.3 1.4 1.5 1.6 led forward voltage vs. temperature i f =50ma i f =20ma i f =10ma i f =5ma temperature (oc) -40 -20 0 20 40 60 80 100 i f on (ma) 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 typical i f for switch operation vs. temperature (i l =250ma) temperature (oc) -40 -20 0 20 40 60 80 100 i f off (ma) 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 typical i f for switch dropout vs. temperature (i l =250ma)
www.clare.com 4 r06 CPC1961 performance data* *the performance data shown in the graphs above is typical of device performance. for guaranteed parameters not indicated in t he written speci? cations, please contact our application department. temperature (oc) -40 -20 0 20 40 60 80 100 on-state voltage (v) 2.05 2.10 2.15 2.20 2.25 2.30 2.35 2.40 2.45 typical on-state voltage vs. temperature (i f =5ma, i l =250ma) -3 -2 -1 0 1 2 3 -300 -200 -100 0 100 200 300 output voltage (v) output current (ma) typical output voltage vs. output current (i f =5ma, t a =25oc) temperature (oc) -40 -20 0 20 40 60 80 100 load current (ma rms ) 0 50 100 150 200 250 300 maximum concurrent total load current vs. temperature (i f =5ma) temperature (oc) -40 -20 0 20 40 60 80 100 blocking voltage (v p ) 710 720 730 740 750 760 770 780 790 typical blocking voltage vs. temperature (i f =0ma) temperature (oc) -40 -20 0 20 40 60 80 100 leakage current (na) 0 20 40 60 80 100 120 140 typical leakage vs. temperature measured between pins 5&6 and 7&8 (i f =0ma, v l =600v) time (s) 0.001 0.01 0.1 1 10 100 current (a) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 maximum non-repetitive surge current (t a =25oc)
CPC1961 www.clare.com 5 r06 manufacturing information moisture sensitivity all plastic encapsulated semiconductor packages are susceptible to moisture ingression. clare classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, ipc/jedec j-std-020 , in force at the time of product evaluation. we test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. this product carries a moisture sensitivity level (msl) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard ipc/jedec j-std-033 . device moisture sensitivity level (msl) rating CPC1961g / CPC1961gs msl 1 esd sensitivity this product is esd sensitive , and should be handled according to the industry standard jesd-625 . reflow profile this product has a maximum body temperature and time rating as shown below. all other guidelines of j-std-020 must be observed. device maximum temperature x time CPC1961g / CPC1961gs 250oc for 30 seconds board wash clare recommends the use of no-clean flux formulations. however, board washing to remove flux residue is acceptable. since clare employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake may be necessary if a wash is used after solder reflow processes. chlorine- or fluorine-based solvents or fluxes should not be used. cleaning methods that employ ultrasonic energy should not be used. rohs 2002/95/ec e 3 pb
www.clare.com 6 r06 CPC1961 michanical dimensions dimensions mm (inches) pcb hole pattern 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 9.144 0.508 (0.360 0.020) 0.457 0.076 (0.018 0.003) 9.652 0.381 (0.380 0.015) 7.239 typ. (0.285) 7.620 0.254 (0.300 0.010) 4.064 typ (0.160) 0.889 0.102 (0.035 0.004) 8-0.800 dia. (8-0.031 dia.) 2.540 0.127 (0.100 0.005) 7.620 0.127 (0.300 0.005) 7.620 0.127 (0.300 0.005) 6.350 0.127 (0.250 0.005) 3.302 0.051 (0.130 0.002) 0.254 typ (0.01) dimensions mm (inches) pcb land pattern 2.540 0.127 (0.100 0.005) 9.652 0.381 (0.380 0.015) 6.350 0.127 (0.250 0.005) 9.525 0.254 (0.375 0.010) 0.457 0.076 (0.018 0.003) 0.813 0.120 (0.032 0.004) 4.445 0.127 (0.175 0.005) 7.620 0.254 (0.300 0.010) 0.635 0.127 (0.025 0.005) 0.254 0.127 (0.010 0.0005) 2.54 (0.10) 8.90 (0.3503) 1.65 (0.0649) 0.65 (0.0255) 3.302 0.051 (0.130 0.002) CPC1961g CPC1961gs
clare, inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publica tion and reserves the right to make changes to specifications and product descriptions at any time without notice. neither circuit patent licenses nor indemnity are expressed or implied. except as set forth in clare?s standard terms and conditions of sale, clare, inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products incl uding, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. the products described in this document are not designed, intended, authorized or warranted for use as components in systems in tended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of clare?s product may result in direct physical harm, i njury, or death to a person or severe property or environmental damage. clare, inc. reserves the right to discontinue or make changes to its products at any time without notice. specification: ds-CPC1961-r06 ?copyright 2011, clare, inc. all rights reserved. printed in usa. 1/7/2011 for additional information please visit our website at: www.clare.com 7 CPC1961 dimensions mm (inches) user direction of feed notes: 1. dimensions carry tolerances of eia standard 481-2 2. tape complies with all notes for constant dimensions listed on page 5 of eia-481-2 embossment embossed carrier top cover tape thickness 0.102 max. (0.004 max.) 330.2 dia. (13.00 dia.) k 1 =4.20 (0.165) 0 k =4.90 (0.193) p=12.00 (0.472) w=16.00 (0.63) bo=10.30 (0.406) ao=10.30 (0.406) CPC1961gs tape & reel
|
